协作头脑风暴
brainstorming
在实现前澄清需求、探索设计选择,并形成清晰的开发方向。
dma-baremetal【开发与工程】Bare-metal DMA skill for memory-peripheral transfers. Use when configuring DMA channels, circular mode, double buffering, or DMA IRQ completion. Activates on queries about DMA bare-metal, circular buffer, memory-to-peripheral, or DMA stream configuration.
独立 GitHub 快照 · 自动分类 · 以原作者文档为准
Configure DMA controllers for memory-to-peripheral and peripheral-to-memory transfers: channel/stream setup, burst sizes, circular mode, half-transfer interrupts, and cache coherency on Cortex-M7.
/* UART2 RX DMA — Stream5, Channel 4 (verify RM matrix) */
RCC->AHB1ENR |= RCC_AHB1ENR_DMA1EN;
DMA1_Stream5->PAR = (uint32_t)&USART2->DR;
DMA1_Stream5->M0AR = (uint32_t)rx_buf;
DMA1_Stream5->NDTR = sizeof(rx_buf);
DMA1_Stream5->CR = DMA_SxCR_MINC /* mem increment */
| DMA_SxCR_TCIE /* transfer complete IRQ */
| DMA_SxCR_CHSEL_2 /* channel 4 */
| DMA_SxCR_EN;
USART2->CR3 |= USART_CR3_DMAR;
DMA1_Stream5->CR |= DMA_SxCR_CIRC; /* auto-reload NDTR */
/* HTIF = first half, TCIF = second half — process in IRQ */
DMA buffer in non-cacheable region or clean/invalidate D-Cache:
SCB_CleanDCache_by_Addr((void*)tx_buf, len);
/* after DMA TX */
SCB_InvalidateDCache_by_Addr((void*)rx_buf, len);
/dma-baremetal Configure UART RX DMA circular buffer on STM32F4
| Symptom | Cause | Fix |
|---|---|---|
| DMA no start | Stream/channel mismatch | RM DMA request mapping table |
| Corrupt RX | Cache coherency (M7) | Invalidate after RX complete |
| NDTR stuck | Peripheral DMA enable missing | USART_CR3 DMAR/DMAT |
| IRQ flood | Clear flags in ISR | DMA_LISR/HIFCR |
skills/baremetal/uart-serial-baremetal — USART DMA enableskills/baremetal/adc-dac-baremetal — ADC DMA modeskills/low-level-programming/cpu-cache-opt — cache line concepts