---

name: lightning-splicing description: | Channel splicing: splice-in (adding capacity) and splice-out (withdrawing) without closing the channel. Replaces "close and reopen" with one splice tx. USE WHEN: increasing/decreasing channel capacity in production, designing dynamic-balance LSP integrations, planning channel lifecycle. allowed-tools: Read, Grep, Glob

Lightning Splicing

Splicing modifies a channel's funding tx (and capacity) without closing the channel. Atomic: previous channel state continues with new funding output.

Pre-splicing, capacity changes meant close + reopen, costing two on-chain txs and disrupting payment flow.

Mechanics

A splice transaction:

• Spends the current channel's funding output.
• Adds new inputs (splice-in) or outputs (splice-out).
• Creates a new funding output with updated capacity.
• Both parties sign.

Channel state continues: existing HTLCs, balances, fees all remain. After confirmation, the new funding output becomes the channel's anchor, and the next commitment uses the new total.

Splice-in (adding liquidity)

inputs:
  funding_output (old)             # previous channel funding
  external_input_1, ..., external_input_n   # new BTC from on-chain wallet

outputs:
  funding_output_new (capacity = old + added)
  change (any leftover from external inputs)

Use case: top up a channel that's nearly empty without disrupting ongoing payments.

Splice-out (withdrawing)

inputs:
  funding_output (old)

outputs:
  funding_output_new (capacity = old - withdrawn)
  withdrawal_output (your on-chain address)

Use case: reduce channel capacity, get on-chain funds without closing.

Combined splice

inputs:
  funding_output (old)
  add_1, ..., add_n

outputs:
  funding_output_new
  withdrawal_1, ..., withdrawal_m
  change

Both directions in one tx.

Protocol (BOLT 2 channel splicing, feature 62/63)

Splicing left draft status when "Channel Splicing (feature 62/63)" (lightning/bolts PR #1160) was merged on 2026-03-23. BOLT 9 now lists option_splice at feature bits 62/63; BOLT 2 has a "Channel Splicing" section.

Prerequisite: quiescence. A splice may only begin once the channel is quiescent (option_quiesce, bits 34/35, the stfu message), and only the quiescence initiator may send splice_init. The channel leaves quiescence as soon as tx_signatures have been exchanged — it does not stay quiescent while the splice tx waits to confirm.

Messages:

• splice_init (type 80) — proposing a splice; carries funding_contribution_satoshis (negative for splice-out) and funding_feerate_perkw.
• splice_ack (type 81) — accepting, with the peer's own funding_contribution_satoshis.
• Then standard tx_* messages from BOLT 2 interactive-tx (re-used): tx_add_input, tx_add_output, tx_remove_*, tx_complete, tx_abort.
• commit_sig, then tx_signatures exchange.
• splice_locked (type 77) — carries the splice_txid that reached acceptable depth.

The splice initiator is responsible for adding the current funding output as an input and the new funding output as an output; both sides may contribute further inputs and outputs during the interactive-tx session.

Confirmation

After tx_signatures, the channel resumes normal operation while the splice transaction is unconfirmed. Several splice transactions can be pending at once:

• Splice txs are RBF-able via tx_init_rbf / tx_ack_rbf, but an RBF attempt is not itself normal operation: the channel must be quiesced again first, and tx_init_rbf may only be sent by the quiescence initiator of that round. That initiator need not be the splice initiator — that is the sense in which either node may RBF. An RBF attempt may also set a different funding_output_contribution (the tx_init_rbf / tx_ack_rbf TLV superseding splice_init's funding_contribution_satoshis), so it is not purely a feerate bump: it is an opportunity to splice more funds in or out without waiting for the first attempt to confirm.
• RBF is forbidden by the spec once option_zeroconf has been negotiated. Every attempt spends the same funding output, so attempts automatically double-spend each other, which risks losing funds at 0-conf. CPFP with another splice instead.
• Each attempt is a candidate. Nodes keep one commitment transaction per candidate funding tx — the pre-splice funding tx plus every splice attempt — and exchange commitment_signed for all of them. Payments must be valid against every candidate.
• Once any candidate reaches acceptable depth, both sides send splice_locked with that splice_txid. On matching txids the other candidates and their ancestors may be discarded, and announcement_signatures are re-sent with the short_channel_id of the locked tx.
• If the two splice_locked messages name different candidates (the peers are on different forks), the spec's recommendation is to ignore the message and wait for one fork to replace the other, rather than failing the channel.

If every splice candidate is evicted or reorged out, the channel simply continues on the pre-splice funding output and its commitment.

Splice + Lightning at the same time

While splice tx is unconfirmed:

• Channel can still process HTLCs.
• Commitment txs are maintained for every pending candidate funding outpoint, and signed in parallel.
• If the splice fails to confirm, in-flight payments must be reconciled via channel_reestablish (its next_funding field names which candidate the signatures belong to).

Implementation status (September 2026)

Implementation	Splice
CLN	Enabled by default since v26.04 (2026-04-20)
Eclair	Final BOLT version since v0.14.0 (2026-05-21)
LDK	Supported since rust-lightning 0.2 (2025-12-02); experimental in ldk-node v0.7.0 (2025-12-03)
LND	Not supported as of v0.21.3-beta (September 2026)

• CLN: high-level splicein / spliceout RPCs, both added in v26.04; spliceout can "cross-splice" by naming a second channel as the destination. The low-level splice_init / splice_update / splice_signed trio is still there underneath.
• Eclair: splicein, spliceout, plus rbfsplice to fee-bump a pending splice (subject to the spec's 0-conf RBF ban above). v0.14.0 removed the pre-standardization prototype splicing from v0.9.0, so prototype-era peers must upgrade.
• LDK: outbound splices via ChannelManager::splice_channel; inbound splices gated on UserConfig::reject_inbound_splices. rust-lightning 0.2.2 (2026-02-06) repointed its SplicePrototype flag from bit 155 to bit 63, resolving a clash with the flag Eclair used for its prototype.
• LND: no splice RPC as of v0.21.3-beta (2026-09-02); issue #8245 is still open. The production taproot-channel work in v0.21.0 (funding-txid-keyed nonce maps in channel_reestablish / revoke_and_ack) is described in its release notes as laying the groundwork for splice support.

Use cases

• LSP dynamic capacity: LSP splices in liquidity to a customer channel on demand without closing.
• Lightning Loop alternatives: splice-out instead of submarine swap.
• Liquidity rebalance between two parties without on-chain disruption.

Common bugs

• Mismatched fee assumptions for splice tx → tx stuck in mempool, channel can't reconcile.
• Failing to handle RBF on the splice tx → both parties confused about which output is "current".
• HTLC in flight at splice time and the splice tx is dropped → HTLC may need retry once reconciliation completes.
• Mempool eviction of splice tx → both sides hold pre-splice commitments; old state continues until splice retried.

See also

• channels/SKILL.md
• bolts/SKILL.md