---

name: sta description: > Static timing analysis — multi-corner constraint validation, setup and hold analysis, timing exception review, and ECO guidance for closure. Use when running timing analysis on a design, reviewing timing violations, guiding ECO fixes, or performing timing sign-off for tape-out. version: 1.0.0 author: chuanseng-ng license: MIT allowed-tools: Read, Write, Bash

Skill: Static Timing Analysis (STA)

Invocation

When this skill is loaded and a user presents a timing analysis task, do not execute stages directly. Immediately spawn the digital-chip-design-agents:sta-orchestrator agent and pass the full user request and any available context to it. The orchestrator enforces the stage sequence, loop-back rules, and sign-off criteria defined below.

Use the domain rules in this file only when the orchestrator reads this skill mid-flow for stage-specific guidance, or when the user asks a targeted reference question rather than requesting a full flow execution.

Pre-run Context

Before executing or advising on any stage, read the following files if they exist:

1. memory/sta/knowledge.md — known failure patterns, successful tool flags, PDK/tool quirks. Incorporate its guidance into every stage decision. If absent, proceed without it.
2. memory/sta/run_state.md — current run identity (run_id, design_name, tool, last_stage). Use this to resume correctly after interruption. If absent, a new run is starting; the orchestrator will create this file before the first stage.

This pre-run read applies whether this skill is loaded by a user or called by the orchestrator mid-flow. It ensures the fix database is consulted before any diagnosis step.

Purpose

Multi-corner, multi-mode timing analysis, exception review, ECO-guided closure, and timing sign-off. WNS ≥ 0 and TNS = 0 at all corners required for tape-out.

---

Supported EDA Tools

Open-Source

• OpenSTA (sta) — standalone open-source STA; runs tcl scripts in batch mode (see sequential flow note below)
• OpenROAD STA subsystem (openroad -no_init) — STA within the OpenROAD PD flow; runs sequentially via tcl script

Proprietary

• Synopsys PrimeTime (pt_shell, dialect synopsys) — gold-standard multi-corner STA and power analysis
• Cadence Tempus (tempus, dialect cadence) — concurrent multi-mode multi-corner STA with ECO guidance

Sequential Flow Log Review (OpenSTA / OpenROAD STA)

OpenSTA (sta) and the OpenROAD STA subsystem (openroad -no_init) execute tcl script commands sequentially. When run in batch mode the agent must parse the output log to extract timing results — there is no interactive prompt to query mid-run.

Key log patterns to parse after run completion:

• report_timing output → extract WNS (worst negative slack) and critical path
• report_tns output → extract TNS (total negative slack) per corner
• report_clock_skew output → global skew and insertion delay per clock group
• check_timing → missing constraints, unconstrained endpoints, loops

Batch invocation:

opensta -no_splash -exit timing_check.tcl > sta.log 2>&1
# or via OpenROAD:
openroad -no_init -exit sta.tcl > sta.log 2>&1

Parse sta.log after completion. Apply loop-back rules (ECO guidance stage) if setup/hold violations are found.

---

Stage: constraint_validation

Validation Checks

1. All clocks defined with correct period and waveform
2. All generated clocks: correct source and division/multiplication
3. No unconstrained paths: verify with report_timing -unconstrained
4. CDCs: correct false_path or max_delay applied
5. Multicycle paths: both –setup N and –hold 1 specified
6. Input/output delays: match system-level timing budget
7. Timing exceptions: not overly broad (masking real violations)
8. Propagated vs ideal clocks: correct mode (ideal pre-CTS, propagated post-CTS)

Common Constraint Errors

Error	Consequence
MCP without hold correction	Hold violations introduced
False path too broad	Real timing issues masked
Generated clock missing	Path unconstrained
Wrong clock period	Over/under-constraining

QoR Metrics to Evaluate

• 0 unconstrained paths
• 0 clock definition errors
• All exceptions reviewed and documented

Output Required

• Constraint QA report
• Clock summary (all clocks, sources, periods)
• Exception list with justifications

---

Stage: multi_corner_analysis

Required Corner Matrix

Corners are driven by design_state.constraints.pvt_corners[]. The table below shows the default corners used when pvt_corners is absent or contains no entries with non-null V/T:

Mode	Setup Corner	Hold Corner
Functional	SS/0.9V/125°C (default)	FF/1.1V/−40°C (default)
Test (at-speed)	SS/0.9V/125°C (default)	FF/1.1V/25°C (default)
Low Power	SS/0.9V/125°C (default)	FF/1.1V/25°C (default)

When pvt_corners is populated, use every entry with "checks": ["setup"] for setup and every entry with "checks": ["hold"] for hold; the defaults above are the fallback.

POCV/AOCV Application

1. AOCV: apply depth and location-based derating (pre-POCV designs)
2. POCV: apply parametric variation (sigma-based, per foundry agreement)
3. Clock uncertainty: pre-CTS ideal values → post-CTS propagated

Path Analysis Priority

1. WNS path per corner (most critical single path)
2. TNS contribution (how many paths fail and by how much)
3. CDC paths with max_delay constraints
4. At-speed paths: launch/capture pair STA

QoR Metrics — Sign-off Targets

Metric	Target
Setup WNS	≥ design_state.constraints.timing.wns_ns_target (default: 0) all corners
Setup TNS	= design_state.constraints.timing.tns_ns_target (default: 0) all corners
Hold WNS	≥ design_state.constraints.timing.wns_ns_target (default: 0) all corners
Hold TNS	= design_state.constraints.timing.tns_ns_target (default: 0) all corners

Output Required

• Timing report per corner (setup and hold)
• WNS/TNS summary table across all corners
• Top 100 violating paths

---

Stage: path_analysis

Domain Rules

1. Group failing paths by root cause: long wire, weak driver, logic depth, high-Vt
2. Separate setup violations from hold violations — different fix strategies
3. At-speed violations: check launch/capture pair timing explicitly
4. False paths: verify every exception is still valid after PD changes
5. Reconvergent fanout: flag paths with reconvergence for careful ECO planning

Output Required

• Failing path analysis (root cause per path group)
• Paths requiring ECO vs paths requiring SDC correction

---

Stage: exception_review

Domain Rules

1. Review every timing exception for correctness and scope:
   • set_false_path: verify the path is truly non-functional (not just inconvenient)
   • set_multicycle_path: verify both -setup N and -hold 1 are set correctly
   • set_max_delay: verify value matches system-level timing budget
2. Overly broad exceptions: any exception matching > 1% of all paths requires architect approval
3. Exceptions masking real violations: revoke immediately and re-run path analysis
4. Every exception must have a documented justification (design intent, async crossing, test mode)
5. Post-ECO exceptions: verify any new exceptions added after ECO are still valid

Common Exception Errors

Error	Consequence
set_false_path on functional CDC	Real metastability risk hidden
MCP without hold correction	Hold violations introduced silently
Exception too broad (glob match)	Unintended paths unconstrained
Expired exception (removed logic)	Stale SDC — may mask other issues

QoR Metrics to Evaluate

• 0 exceptions without documented justification
• 0 overly broad exceptions (flagged for architect review)
• Exception list reviewed and signed off before ECO guidance begins

Output Required

• Exception audit report (valid / revoked / needs-approval per exception)
• Revised SDC with invalid exceptions removed
• Exception sign-off record

---

Stage: eco_guidance

ECO Decision Tree

Setup violation:
  Logic depth > target?       → Retime / add pipeline stage
  Long wire (> 500μm)?        → Buffer insertion / reroute on upper metal
  Weak driver?                → Upsize driver cell
  High-Vt on critical path?   → Swap to SVT or LVT
  Reconvergent fanout?        → Clone cell / split net

Hold violation:
  Skew-induced (post-CTS)?    → Useful skew / targeted delay buffer
  Short path (< 1 cycle)?     → Insert HVT delay buffer
  New path from ECO?          → Targeted hold buffer at sink register

ECO Rules

1. Minimum ECO footprint: fewest cell changes to fix the most violations
2. Prefer resize over add new cell (less routing impact)
3. ECO cells: place in pre-reserved ECO sites or free standard cell rows
4. Re-run STA after every ECO batch — never accumulate blind
5. LEC after every ECO: verify equivalence preserved
6. Never introduce new hold violations while fixing setup (and vice versa)

QoR Metrics to Evaluate

• ECO efficiency: violations fixed per change
• ECO cell count: < 2% of total cells (flag if exceeded — upstream issue)
• Post-ECO LEC: EQUIVALENT

Output Required

• ECO change list (cell, action, justification)
• Pre/post ECO timing comparison
• ECO LEC result

---

Stage: sta_signoff

Sign-off Checklist

• Setup WNS ≥ design_state.constraints.timing.wns_ns_target (default: 0) at all corners
• Setup TNS = design_state.constraints.timing.tns_ns_target (default: 0) at all corners
• Hold WNS ≥ design_state.constraints.timing.wns_ns_target (default: 0) at all corners
• Hold TNS = design_state.constraints.timing.tns_ns_target (default: 0) at all corners
• All exceptions valid and documented
• POCV/AOCV applied per foundry spec
• LEC clean post all ECOs

Output Required

• Sign-off timing report (all corners, all modes)
• ECO change summary
• Timing sign-off record

---

Constraint Validation

See plugins/meta/skills/pipeline-orchestration/SKILL.md §Constraints Schema for the authoritative schema and stage-entry validation rule.

Required at entry (constraint_validation) — hard-fail if missing:

• constraints.clock.clk_mhz — clock frequency used to interpret timing results
• constraints.pvt_corners — at least one entry with non-null voltage_v and temp_c; missing or invalid entries should hard-fail during constraint_validation

Optional (schema defaults apply when absent):

• constraints.timing.wns_ns_target (default: 0) — WNS sign-off threshold
• constraints.timing.tns_ns_target (default: 0) — TNS sign-off threshold
• constraints.timing.skew_ps_max (default: 100) — CTS skew limit
• constraints.timing.transition_ps_max (default: 200) — max clock transition
• constraints.timing.insertion_delay_ps_max (default: 500) — max insertion delay

---

Memory

Write on stage completion

After each stage completes (regardless of whether an orchestrator session is active), write or overwrite one JSON record in memory/sta/experiences.jsonl keyed by run_id. This ensures data is persisted even if the flow is interrupted or called without full orchestrator context.

Use run_id = sta_<YYYYMMDD>_<HHMMSS> (set once at flow start; reuse on each stage update). Set signoff_achieved: false until the final sign-off stage completes.

Run state (write before first stage, update after each stage)

Write memory/sta/run_state.md as the first action before launching any tool:

run_id:      sta_<YYYYMMDD>_<HHMMSS>
design_name: <design>
tool:        <primary tool>
start_time:  <ISO-8601>
last_stage:  <first stage name>

Update last_stage after each stage completes. This file lets wakeup-loop prompts and resumed sessions identify the correct run without relying on in-memory state. Create the file and parent directories if they do not exist.

Optional: claude-mem index

If mcp__plugin_ecc_memory__add_observations is available in this session, emit each applied fix as an observation to entity chip-design-sta-fixes after writing to experiences.jsonl. Skip silently if the tool is absent — JSONL is the canonical record.