---

name: polish-gemstone locale: caveman-ultra source_locale: en source_commit: 82c77053 fence_basis_commit: 82c77053 translator: "Julius Brussee homage — caveman" translation_date: "2026-04-26" description: > Polish cut gemstones to final finish via progressive abrasive sequences. Pre-polish sanding, polishing compounds, lap pick, quality assess for cabs + faceted. Use → cab/faceted post-cut ready for polish, pick compound + lap for species, troubleshoot failed polish (orange peel, haze, scratches), re-polish worn stone. license: MIT allowed-tools: Read metadata: author: Philipp Thoss version: "1.0" domain: lapidary complexity: intermediate language: natural tags: lapidary, polishing, finishing, abrasives, gemstones

Polish Gemstone

Polish cut gemstones → optical-quality finish via progressive abrasives, right compounds, correct lap/pad for cabs + faceted stones.

Use When

• Cab or faceted stone done w/ cutting, ready for polish
• Pick correct compound + lap per species
• Troubleshoot polish not reaching full lustre (orange peel, haze, scratches)
• Re-polish stone w/ surface wear/scratches

In

• Required: Cut gemstone ready for polish (cab dome shaped + smoothed, or faceted w/ all facets cut)
• Required: Species ID (compound + lap depend on material)
• Optional: Cabbing machine w/ polishing wheels/pads (cabs)
• Optional: Faceting machine w/ polishing laps (faceted)
• Optional: Compounds: cerium oxide, aluminum oxide, diamond paste (various microns), tin oxide, chromium oxide
• Optional: Laps: tin, copper, ceramic, Batt (synthetic), BATT lap, Corian, Lucite, leather, felt
• Optional: 10x loupe or gemological microscope

Do

Step 1: Surface Prep

Stone surface properly prepared from cutting.

Pre-Polish Surface Check:
+--------------------+------------------------------------------+
| Check              | Requirement                              |
+--------------------+------------------------------------------+
| Previous grit      | All scratches from the cutting stage     |
| scratches          | must be removed by the final grit        |
|                    | (typically 1200 or 3000)                 |
+--------------------+------------------------------------------+
| Surface uniformity | No flat spots on cabochons, no uneven    |
|                    | facets on faceted stones                 |
+--------------------+------------------------------------------+
| Cleanliness        | Stone thoroughly cleaned between grits   |
|                    | and before polishing. Grit contamination |
|                    | is the #1 cause of polish failure        |
+--------------------+------------------------------------------+
| Dop security       | Stone securely dopped — shifting during  |
|                    | polish destroys facet geometry           |
+--------------------+------------------------------------------+

1. Examine under 10x mag
2. Look for cutting-grit scratches → parallel lines
3. Scratches remain → return to appropriate grit before polish
4. Clean thoroughly: ultrasonic or brush w/ dish soap + water
5. Clean hands, dop, work area → grit contamination transfers easily

→ Scratch-free surface at pre-polish grit, thoroughly cleaned, secure dopping. Glass-smooth to fingernail.

If err: scratches persist after repeated fine-grit grinding → directional hardness (corundum, kyanite). Change grinding direction. Contamination → clean everything, replace water.

Step 2: Pre-Polish Sequence (Cabs)

Cab → work through pre-polish grits.

Cabochon Pre-Polish Sequence:
+------+-----------+------------------------------------------+
| Stage| Grit      | Purpose                                  |
+------+-----------+------------------------------------------+
| 1    | 220       | Shape and dome (cutting stage — done)    |
+------+-----------+------------------------------------------+
| 2    | 600       | Remove 220 scratches, refine shape       |
+------+-----------+------------------------------------------+
| 3    | 1200      | Remove 600 scratches, smooth surface     |
+------+-----------+------------------------------------------+
| 4    | 3000      | Remove 1200 scratches (optional but      |
|      | (or 1500) | recommended for hard stones like agate)  |
+------+-----------+------------------------------------------+
| 5    | 8000      | Pre-polish (some machines include this)   |
|      | (or 14000)| Fine diamond paste on appropriate pad     |
+------+-----------+------------------------------------------+

TIME PER GRIT: Spend equal time at each stage. Rushing a grit
stage means scratches carry forward and become visible after
polishing. A typical cabochon takes 3-5 minutes per grit stage.

1. Each grit in order — never skip
2. Per stage, examine under mag → confirm prev-grit scratches gone before advance
3. Clean stone + hands between grits
4. Consistent pressure + motion across surface
5. Water flowing → prevent heat buildup

→ Uniform satin-smooth surface, no scratches under 10x mag.

If err: scratches persist at grit → continue, don't advance. Deep scratches won't come out → drop back one grit, re-grind. Coarser-grit contamination = top cause of persistent scratching.

Step 3: Compound + Lap Selection

Pick correct compound + lap per species.

Polishing Compound Guide:
+-------------------+------------------------------------------+
| Compound          | Best For                                 |
+-------------------+------------------------------------------+
| Cerium oxide      | Quartz family (agate, jasper, amethyst,  |
|                   | chalcedony), feldspar, obsidian          |
|                   | Mix: paste consistency with water        |
|                   | Lap/pad: leather, felt, or Batt          |
+-------------------+------------------------------------------+
| Diamond paste     | Universal — works on everything          |
| (50,000 mesh /    | Essential for corundum, spinel, topaz,   |
| 0.25-0.5 micron)  | garnet, and other hard stones            |
|                   | Lap: tin, copper, ceramic, Corian        |
+-------------------+------------------------------------------+
| Aluminum oxide    | Corundum (ruby, sapphire), spinel,       |
| (0.3 micron)      | chrysoberyl                              |
|                   | Lap: ceramic, tin, wax                   |
+-------------------+------------------------------------------+
| Tin oxide          | Quartz varieties, opal (gentle polish)  |
|                   | Lap: leather, felt, Lucite              |
+-------------------+------------------------------------------+
| Chromium oxide    | Jade (jadeite, nephrite), emerald        |
| (green compound)  | Lap: leather                             |
+-------------------+------------------------------------------+
| Linde A           | Corundum, spinel — traditional choice    |
| (aluminum oxide)  | Lap: wax, ceramic, tin                   |
+-------------------+------------------------------------------+

Polishing Lap Guide (Faceted Stones):
+-------------------+------------------------------------------+
| Lap Material      | Use                                      |
+-------------------+------------------------------------------+
| Tin (type metal)  | General-purpose polish lap. Good for     |
|                   | most stones with diamond or alumina      |
+-------------------+------------------------------------------+
| Copper             | Diamond polish for hard stones          |
|                   | (corundum, spinel, topaz)                |
+-------------------+------------------------------------------+
| Ceramic (BATT,    | Diamond polish. Forgiving, good for     |
| Darkside, Last    | beginners. Works on most materials       |
| Lap)              |                                          |
+-------------------+------------------------------------------+
| Corian (solid     | Oxide polishes. Good for quartz family   |
| surface)          |                                          |
+-------------------+------------------------------------------+
| Lucite/Plexiglass | Oxide polish for quartz, softer stones   |
+-------------------+------------------------------------------+
| Leather/felt      | Cabochon polishing. Cerium oxide or      |
|                   | tin oxide                                |
+-------------------+------------------------------------------+

1. Match compound to species
2. Pick lap/pad material
3. Unknown/uncommon stones → diamond paste on ceramic = safest start
4. Prep compound: oxides → thin paste w/ water; diamond paste sparingly on lap
5. Apply evenly → excess = "orange peel" texture

→ Compound + lap combo appropriate for species. Wrong combo = wasted time, sub-optimal finish.

If err: standard compound doesn't polish well first try → (1) different lap material, (2) finer compound grade, (3) reduce pressure. Polishing-speed-sensitive stones → slower rpm. All else fails → diamond paste on tin or ceramic works on virtually anything.

Step 4: Final Polishing

Execute polish.

Polishing Technique:

CABOCHON POLISHING:
1. Apply compound to the leather/felt wheel
2. Run the wheel at moderate speed (lower than grinding)
3. Hold the stone lightly — REDUCE pressure compared to grinding
4. Move the stone across the wheel surface with gentle sweeping motion
5. Polish for 2-5 minutes, checking progress with a loupe
6. Add compound sparingly — too much creates orange peel

FACETED STONE POLISHING:
1. Charge the polishing lap with compound
2. Set the SAME angle as the cutting stage for each facet tier
3. Lower the stone gently onto the spinning lap
4. Polish each facet with light, consistent pressure
5. Check each facet under a loupe before moving to the next
6. Re-charge the lap periodically but do not over-charge

SPEED AND PRESSURE:
- Polishing speed: 50-75% of cutting speed
- Pressure: LIGHT — let the compound do the work
- Heavy pressure causes heat, orange peel, and facet rounding
- On faceted stones, heavy pressure rounds facet edges ("soft meets")

1. Apply compound to lap/pad
2. Set correct angle (faceted) or hold dome angle (cab)
3. Polish w/ light, even pressure
4. Check progress every 1-2 min under 10x
5. Continue until full lustre, no remaining scratches
6. Final rinse → remove all compound residue

→ Fully polished surface w/ mirror lustre (faceted) or deep even lustre (cab). No scratches under 10x. Sharp facet edges + crisp meets.

If err: common polish problems + solutions:

• Orange peel (textured): Too much compound, pressure, or contaminated lap. Clean lap + re-apply sparingly
• Persistent scratches: Coarser-grit contamination. Clean everything, check compound, re-polish
• Soft meets (rounded facet edges): Too much pressure. Reduce + use harder lap
• Haze (no full lustre): Wrong compound for material, or compound too dry. Different compound or add water/extender

Step 5: Quality Assessment

Inspect under mag.

Final Quality Checklist:
+--------------------+------------------------------------------+
| Criterion          | Standard                                 |
+--------------------+------------------------------------------+
| Lustre             | Full, even lustre across all surfaces    |
|                    | No dull patches or haze                  |
+--------------------+------------------------------------------+
| Scratches          | None visible under 10x magnification     |
|                    | Check under multiple light angles        |
+--------------------+------------------------------------------+
| Orange peel        | None — surface should be optically flat  |
|                    | on each facet / smoothly curved on cabs  |
+--------------------+------------------------------------------+
| Facet edges        | Sharp and well-defined (faceted stones)  |
| (faceted)          | No rounding or "soft meets"              |
+--------------------+------------------------------------------+
| Dome uniformity    | Smooth, even curvature (cabochons)       |
| (cabochons)        | No flat spots or high points             |
+--------------------+------------------------------------------+
| Cleanliness        | All compound residue removed             |
|                    | Stone cleaned ultrasonically or by hand  |
+--------------------+------------------------------------------+

1. Clean thoroughly → residue can mimic polish
2. Examine under bright directional light at multiple angles
3. 10x mag → check remaining scratches
4. Faceted: each facet individually + verify meet precision
5. Cabs: dome reflects single undistorted light point ("light return test")
6. Record final weight + dimensions

→ Pro-quality polish: full lustre, no scratches under 10x, sharp facet edges or smooth dome, clean of residue. Ready for setting, display, sale.

If err: specific areas fail → spot-polish individual facets (faceted) or return to wheel for areas (cabs). Don't re-polish whole stone unless defect widespread.

Check

• Pre-polish surface scratch-free before polishing
• Stone + equipment cleaned between every grit
• Correct compound selected for species
• Appropriate lap/pad used
• Light pressure throughout
• No scratches under 10x in final inspection
• Full lustre across surfaces
• Facet edges sharp (faceted) or dome smooth (cab)
• All residue removed in final cleaning

Traps

• Grit contamination: #1 cause of polish failure. Single 220 grain on polishing lap → deep scratches. Clean obsessively between stages.
• Too much pressure: Heavy → heat (can crack stone), orange peel, rounded facet edges. Let compound work — pressure barely > stone's weight.
• Too much compound: Over-charging lap → slurry layer → orange peel not flat polish. Apply sparingly + re-charge periodically.
• Wrong compound for species: Cerium oxide great on quartz, poor on corundum. Diamond paste works on everything but expensive. Match to stone.
• Skip inspection: Always check under 10x before declaring complete. Naked-eye-invisible defects → obvious once set in jewellery or examined by buyer.

→

• cut-gemstone — cutting must be done properly before polish; scratches from cutting can't be fixed during polish alone
• appraise-gemstone — polish quality affects "cut" grade in appraisal, esp brilliance + surface finish