---

name: scienceworld-object-classifier description: Moves a tested or examined object into a designated container (e.g., a specific colored box) based on a determined property. Use when you have completed a test or inspection and need to fulfill a classification or sorting subtask. It takes the object and target container as inputs and performs the move action.

Instructions

Purpose

This skill is used to finalize a classification task by moving an object into its designated container. It is triggered after a property test or inspection has been completed and a decision has been made.

Prerequisites

1. Object Location: The object to be classified must be present in the current room's environment (e.g., on the floor, on a table).
2. Container Location: The target container (e.g., yellow box, purple box) must be present in the current room's environment.
3. Decision Made: You must have already determined the object's property (e.g., electrically conductive vs. non-conductive) and know which container corresponds to that property.

Core Action

Execute the move command to transfer the object into the correct container.

• Command Format: move <OBJECT> to <CONTAINER>
• Example: move metal pot to yellow box

Workflow

1. Confirm Environment: Use look around to verify the object and target container are present.
2. Execute Move: Perform the move action.
3. Verify: Optionally, look at <CONTAINER> to confirm the object is now inside.

Important Notes

• This skill is for the final sorting action only. Do not use it to perform the initial test or inspection.
• Ensure the object is not in your inventory. If it is, drop it first (drop <OBJECT>).
• The skill assumes the classification logic (e.g., interpreting a circuit test) has already been handled by a prior process.

Example

Task: Sort a metal pot after a conductivity test determined it is conductive.

1. look around — confirm metal pot and yellow box are in the room.
2. move metal pot to yellow box
3. look at yellow box — verify: "containing a metal pot".